A worker in Victoria was recently injured in an incident in which a filter tank ruptured during commissioning of a paste plant and released about 400 tonnes of slurry.
The 200,000 litre filter tank failed at a newly commissioned paste plant, and the tank was being filled with thickened tailings (slurry) for the first time.
The wall in the tank’s lower section ruptured and a section of the tank wall came away, causing significant damage to the structural components of the surrounding building.
Employees in the immediate vicinity were impacted by the slurry mass which was released, and one employee suffered an eye injury from contact with the slurry.
To reduce the risk of plant failure, mine operators should ensure:
- Suitably competent persons are engaged to design and manufacture storage tanks and confirmation is provided prior to tank commissioning that tanks are designed to withstand loading from slurry, with sufficient safety factors included
- Engineering designs are independently reviewed, to ensure all potential loads and risks have been considered and addressed
- Contractor management systems are robust and consider the risks associated with the construction and commissioning of plant and associated infrastructure
- Safe systems of work are developed and implemented for the commissioning of tanks, including personnel exclusion zones and safe methods of inspecting vessels during commissioning testing (with water, and later with slurry)
- Checks and inspections are carried out during the commissioning process to ensure components and manufacturing/assembly of the tank is in accordance with design specifications.
Furthermore, employers and self-employed persons with management or control of plant must:
- Identify all hazards, so far as is reasonably practicable, associated with the installation, erection, commissioning, decommissioning, dismantling and use of plant
- Eliminate or reduce risks associated with plant, so far as is reasonably practicable, according to the hierarchy of control set out in part 3.5 of the OHS regulations
- Ensure plant is inspected to the extent necessary to ensure any risks associated with the use of the plant are monitored.
Australian Institute of Health & Safety
October 8, 2019.